RTD to DC current / voltage isolator converter - Z109PT2
Z109PT2 is a converter for Thermoresistance RTD (PT100, PT1000,
PT500, Nì100) with 2,3,4 wires and provides a mA/V standard
output signal. It’s completely configurable through dip switches
and software. A 3-way galvanic isolation among Power supply //
input // output circuits assures the integrity of your datas.
General Data
- Power supply: 10..40 Vdc / 19..28 Vac / 50-60 Hz
- Power consumption: 2,5 W
- Isolation: 1.500 Vac (3 way)
- Power transducers: Yes
- Accuracy: 0,1%
- Response time: 35 ms (11 bit)..140 ms (16 bit)
- Status Indicators: Power supply, error, data transmission, data reception, input status
- Setting: Dip- switches, EASY_Z109 (PC software)
- Mounting: 35 mm DIN rail guide
- Protection Degree: IP20
- OperatingTemperature: -10..+60 °C
- Dimension (W x H x D): 17.5 x 100 x 112 mm
Input
- Channel Numbers 1
-
RTD: Pt100, Pt500, Pt1000, Ni100
Measure 2, 3, 4 wires
Range: -200..600 °C
Resolution 0,1°C
Output
- Channel Numbers:1
-
Voltage: 4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.000 Ω -
Current: 2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
Standard
- Approval: CE
-
Norms: EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN
50140/141; EN 61010-1