Z204 - AC/DC VOLTAGE TO DC CURRENT/VOLTAGE ISOLATOR/CONVERTER
Z204 accepts an alternate or direct voltage (up to 1.200 Vdc and
850 Vac) TRMS and provides an isolated analog output (mA or
V). It disposes also of dip switches to set the specific range, input
and output. It’s available also a RS485 Modbus RTU interface. A
3-way galvanic isolation (up to 2,5 KV) among power supply //
input // output circuits assures the integrity of your datas.
TECHNICAL SPECIFICATIONS
General Data
- Power Supply: 10..40 Vdc; 19..28 Vac
- Power Consumption: 1 W
- Isolation: 2.500 Vac between input and power supply/output ports
- Accuracy: 0,5%
-
Status Indicators:
- Power Supply
- Fail
- RS485 Communication -
Communication Interfaces:
- RS485, 1.200..115.200 bps
- RS232, 2.400 bps, address: 01, parity: no, data: 8 bits, stop
bits:1 -
Setting: DIP-switches (adress, baud rate, line termination, input range)
EASYSETUP (PC Software) - Mounting: 35 mm DIN rail guide
- Protection: Degree IP20
-
Operating temp.: -20..+65°C
Weight: 140 g - Dimension (W x H x D): 17.5 x 100 x 112 mm
Input
- Channel Numbers: 1
-
Voltage Range:
- Direct Voltage Range: 0..1200 Vdc,
- Alternate Voltage Range: 0..850 Vac
- Impedance: 800 kΩ
- Frequency: 30..300 Hz
- Accuracy: 0.5
Output
- Channel Numbers: 1
- Voltage: 0..10 V, Min load resistance: 2.500 Ω
- Current: 2 scales: 0/4..20 mA (active/passive), Max load resistance: 600 Ω
- RS485* 1200..115200 Baud * alternatively to the analog output
- RS232 2400 Baud, Address: 01, Parity: NO, Data: 8bits; Stop bits: 1
Standard
- Approval: CE
-
Norme:
- EN 61000-6-4
- EN 64000-6-2
- EN 61010-1